Packing List
These parts should all be included in your keyboard kit!
The Re-gret kit on KeebSupply is available in a wireless and wired version. Depending on the version there will be different components included.
Included in both Versions
| Image | Description | Quantity |
|---|---|---|
 | PCB | 1 |
 | Plate | 1 |
 | 3D printed case with heat set inserts preinstalled | 1 |
 | 3D printed middle layer | 1 |
 | Acrylic cover | 1 |
 | Rubber feet | 6 |
 | M2x5mm flat head screws | 16 |
 | M2x8mm standoffs | 4 |
 | Seeed controller (RP2040 or nRF52840) | 1 |
 | Shift register | 1 |
 | IC sockets | 2 |
 | MillMax pins | 14 |
 | Pogo pin | 1 |
 | Reset button | 1 |
 | Diodes | 40 |
 | Choc HotSwap sockets | 35 |
Only included in the wireless Version
| Image | Description | Quantity |
|---|---|---|
 | Slide switch | 1 |
 | JST battery connector | 1 |
| Extra pogo pin | 1 |
To build the wireless version you'll additionaly need a 401015 lithium polymer battery.
If you don’t have one already, try this one.