# Required SuppliesYou will need these supplies to build your TutelPad!

| Image                                  | Part                                 | Description                                                                                                           |
| -------------------------------------- | ------------------------------------ | --------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- | --- |
|                                        |                                      |                                                                                                                       |
| ![fpluto](pluto.jpg)                   | ProMicro compatible micro controller | ProMicro compatible micro controller                                                                                  | You will need to supply your own micro controller. You can use a ProMicro, Elite-C, Helios, Pluto or any other ProMicro compatible controller for this. |     |
| ![flush-cutters](flush-cutters.webp)   | flush cutters                        | You will need these to cut the legs of the OLED.                                                                      |
| ![flat-head](flat-head.jpg)            | flat head screwdriver                | You will need a small screw driver for the M2 Screws.                                                                 |
| ![soldering-iron](soldering-iron.webp) | soldering iron                       | We recommend a good soldering iron!                                                                                   |
| ![solder](solder.webp)                 | solder                               | Please use high quality solder (flux core or apply flux externally) to make your life easier when soldering this kit! |