# Packing ListThese parts should all be included in your Static kit! | Image | Description | Reference | Quantity | | --------------------------------------- | ----------------------------------------------------------------------------------------- | --------- | ----------------- | | | | | | | ![pcb](pcb.jpg) | PCB | | 1 | | ![switch-plate](switch-plate.jpg) | switch plate | | 1 | | ![bottom-plate](bottom-plate.jpg) | bottom plate | | 1 | | ![plexicover](plexicover.jpg) | acryl cover | | 1 | | ![feet](feet.jpg) | 3D-printed feet | | 1 left
1 right | | ![rubber-feet](rubber-feet.jpg) | rubber feet | | 6 | | ![small-standoffs](small-standoffs.jpg) | small standoffs
(M2x8mm) | | 4 | | ![big-standoffs](big-standoffs.jpg) | big standoffs
(M2x12mm) | | 4 | | ![screws](screws.jpg) | screws
(M2x16mm) | | 16 | | ![oled11](oled11.jpg) | OLED screen

The OLED screen is sealed in an antistatic bag upon arrival. | OL1 | 1 | | ![ec11](ec11.jpg) | EC11 rotary encoder | MX12 | 1 | | ![rotary-knob](rotary-knob.jpg) | aluminium rotary encoder knob | | 1 | | ![usb](usb.jpg) | USB-C port | J1 | 1 | | ![button](button.jpg) | RESET and BOOT buttons | SW1, SW2 | 2 | | ![atmega](atmega.jpg) | ATMEGA328P processor | U1 | 1 | | ![clock](clock.jpg) | clock
16MHz | Y1 | 1 | | ![fuse](fuse.jpg) | fuse
500mA | F1 | 1 | | ![smol-diode](smol-diode.jpg) | small diodes
1N4148 | D1...48 | 48 | | ![big-diode](big-diode.jpg) | big diode
1N4729 | D49, D50 | 2 | | ![75Ohm](75Ohm.jpg) | resistor
75Ohm | R3, R4 | 2 | | ![1,5kOhm](1,5kOhm.jpg) | resistor
1.5kOhm | R6 | 1 | | ![5,1kOhm](5,1kOhm.jpg) | resistor
5,1kOhm | R1, R2 | 2 | | ![10kOhm](10kOhm.jpg) | resistor
10kOhm | R5 | 1 | | ![smol-cap](smol-cap.jpg) | capacitor
20pF | C3, C4 | 2 | | ![big-cap](big-cap.jpg) | capacitor
0,1uF | C1, C2 | 2 | | ![diode-bender](diode-bender.jpg) | diode bender

Use this diode bender to perfectly bend the diodes to fit in our PCB. | | 1 | | ![allen-key](allen-key.jpg) | allen key | | 2 |